Category Archives: 2260 SciFi Series

2260 SciFi Series, Products

Product: Crew Restrooms 2260 by 3-D-C

Leave a comment

Original Price: 8.50$

Untitled-1  http://www.renderosity.com/mod/bcs/crew-restrooms-2260-by-3-d-c/74467

Need some refreshment after your exhausting space mission?
Here is your restroom to get cleaned, showered and refreshed.

What does a pilot need after a long ride in a tiny tinbox in space? Just some shower, a little refreshment, probably a toilet, get clean and off into bed.

Here is your restroom for your scifi scenes. This set, fitting to the other 2260 scifi Series, comes with toilets, showers, washing tables and  a hell of poses to make your start easy. As usually, the 2260 sets contain all light sets (17 in this set), poses (40 in this set) and camera spots (4) to give you an easy start.

The entire set is build in modular way. The room itself parts into seven pieces, so you can easily load only those parts you directly need, or hide those you dont need. This safes memory and allows long camera lens shots. No need to turn your focal lense down to under 20 or so.

The light sets allow using the upper main lights or side spots, which give you loads of ways to light the room and create different athomspheres: From dark to light.

As all the 2260 SciFi Products are build in the same way and with the same style etc, this is a great addition to the Crew Quarters. However runs of course as a standalone product.

A User Manual is included.

We regular issue freebies associated to the sets: poses, props, etc. So the SciFi sets gain value over time.

All renders shown are 100% Poser output.

Out of the box, this set contains:

Figures and Props:
– Wall Sets P0 – P6 (Modular Parts fitting to a large room)
– Showers applying to part 5 as a boned figure to open and close the doors
– Toilets for P4 and P6, boned figures so you can open and close the doors and raise and lower the lid
– a bench to let your figures change their cloth
– A washing table
– Two Smartprops (a toothbrush) for M4 and V4

Lights:
– A moduler set of 17 light sets for the room
All lights load to the room part or prop they belong to, so you can easily assemble the room in a different way, no problem to
reassemble the lights

Poses:
– 20 Poses for M4
– 20 Poses for V4

Expressions:
– 2 Expressions for tooth-brushing (M4/V4)

Rem: I recommend using my free poses for M4 and V4 for other setups, check my website for the freebies.

Cameras:
– four camera sets for a dolly cam

Wall Parts use morph injects to open the doors.
You can also simply assemble this set with my free corridors to connect the other 2260 series sets, or simlpy make your own scenes.

Rem: Victoria 4 or Michael 4 figure, character, clothing or hair not included!
DAZ Studio has been tested. All props and figures load ok. Textures for the lockers must be manually applied.
Water application shown in sample renders are not part of this product.

Get your refreshment now.
We need you fresh for the next mission!

 

 

2260 SciFi Series, Products

Product: Command & Control Center 2260

Leave a comment

Original Price: 10.90$

Untitled-1  http://www.renderosity.com/mod/bcs/command-control-center-2260/74835

“Attention! This is the Commander! We have contact at 20, langitude 455.
All fighters, approach!”

Alright, you all waited long enough. The Prometeus is ready for the battle!
Here is your 2260 Command and Control Center. This large place comes in four room parts, with enough consoles and seats to have a competent crew working in. In the center you have the large planning table, a radar grid and a ceiling mounted information console.
What else does a  starship commander need to steer his fleet into a mission?!
The entire product is build with care and to leave you room to assemble and make your own stories. It fits into the overall 2260 schema and the delivered 25 poses for M4 and V4 and the 29! Lights, which all load to the parts assigned make this an easy to handle product.
.

Out of the box, this set contains:

Figures and Props:
– Four Wall Sections for the Room (Two with doors and injected morph to open and close the door)
– Ceilings for the Wall Parts
– Stool sets as figures, so you can easily move the stools around
– The Mid Console with a hologram inject morph
– The upper Information Console  (You can uplift it to let it hide in the ceiling)
– The Radar Grid
– Wall Signs with lights assigned
– Two Smaller tables with a hologram inject morph

Smartprops:
– A binder of a handbook conforming to M4 Left and Right hand (Injected Morph to open and close)
– A Broadcast Phone handset also for M4

Lights:
– Modular light sets of 29 Lights loading to the wall parts. This include
–  Neonlamps UP, Ladders and DOWN
– Console Lights based upon Image Based Lighting
– Lights for the Ceiling Spots
– Floor Lightning
– Mid Table Light
– Radar Light
– Door Lights

Poses:
– 12 Poses for M4 (all special to the set)
– 13 Poses for V4 (all special to the set)
Rem: I recommend using my free poses for M4 and V4 for other setups, check my website for the freebies.

Cameras:
– five camera sets

The entire set is build in modular way. You only need to load the parts you need.

Wall Parts use morph injects to open the doors. You can also simply assemble this set with my free corridors to connect
the other 2260 series sets, or simlpy make your own scenes.

.The product is designed for Poser use, but we tested in working ok in DAZ 2.3 up.

Rem: V4/M4 Figures, Hair and Clothing not included.

 

 

2260 SciFi Series, Products

Product: Airlock 2260

Leave a comment

Original Price: 9.80$

Untitled-1  http://www.renderosity.com/mod/bcs/airlock-2260/75223“Hold on guys! It’s about to get in!”

No, this is not scary, its only an Airlock. But it is the gateway to outer space, or the planet your station is on, or… or … or….
This is the ultimate Airlock you must have been waiting for. Its a room in modular way, so you can simply assemble the parts together as you may need them.
.
.

Out of the box, this set contains:

Figures and Props:
– Wall Parts and Sections to assemble a complete closed room, parts in the front wall sets contain morphs to open the doors
– Ceilings for the Wall Parts
– Floor sets for the parts with Morph Injects to let the gutters slide away
– An inner Airlock System with a large door that opens in two way

Lights:
– Modular Light System of 19 lights applying to the locale
– Upper Lights
– Floor Spots
– Control Lights
– Door Lights

Poses:
– 6 Poses for M4 (all special to the set)
– 6 Poses for V4 (all special to the set)
Rem: I recommend using my free poses for M4 and V4 for other setups, check my website for the freebies.

Cameras:
– nine camera sets

The entire set is build in modular way. You only need to load the parts you need.

Wall Parts use morph injects to open the doors. You can also simply assemble this set with my free corridors to connect
the other 2260 series sets, or simlpy make your own scenes.

.The product is designed for Poser use, but we tested in working ok in DAZ 2.3 up.

Rem: V4/M4 Figures, Hair and Clothing not included.

 

 

2260 SciFi Series, Products

Product: Genetic Laboratory 2260

Leave a comment

Original Price: 11.90$

Untitled-1  http://www.renderosity.com/mod/bcs/genetic-laboratory-2260/78403

“I am not sure what IT is and where IT came from, but it reacts
Strange to all kind of Genetic Manipulation!”

Ever had the need for putting your aliens and monster into some genetic treatment? Building a SciFi Scene with a captured creature or a mutated human to be put under arrest?

This set will give you the genetic laboratory you need!

The product is a complete set of a room (in two parts), every part comes with separate boned walls, so you can simply hide the wallparts you need. Make long focal lens shots. No hustle with the cameras anymore. (btw:10 Dolly Cams are included).
The chamber has some additional functionality such as like a closing floor door, a lifting platform etc. Also, all doors can open close.
The set is also fitted with all Light sets for all single lights present in the scene, overall, thats 20 light sets.All loadable in stack mode, so simply load the ones you need.
25 Poses for M4 and V4 are also included.
This is so complete, you can immidiatly start of and build your scary scifi scenes you ever dreamed of.
As it fits into the entire line of the 2260 series (check our store here on renderosity for more), it is adding additional value to your previous purchased with us.

Come on, what are you waiting for?

Out of the box, this set contains:

Figures:
– Wall Set P1 to P4, boned parts P1, P2, P3 and P4, also the doors which can slide open
– Wall Set P5 to P8, boned parts P5, P6, P7 and P8, also the doors which can slide open
– Main Floor with boned floor doors
– Main Ceiling
– Chamber with boned side walls P-1 to P-4, the Ceiling and the Doors Boned (Pose to open and close doors included)

Lights:
– Modular Light sets, all loading to the parts they belong to. Every light is preset single.
– All lights combined in one
(Overall 20 Light Sets included)

Poses:
– 14 Poses for M4 (all special to the set)
– 11 Poses for V4 (all special to the set)
Rem: I recommend using my free poses for M4 and V4 for other setups, check my website for the freebies.

Props:
– A simple rolling table
– Another table
– Log File Smartprop for M4 (two poses included)
– A Tablet PC for M4 and V4 Smartprop

Cameras:
– ten camera sets for a dolly cam

The entire set is build in modular way. You only need to load the parts you need.

There will be future additional material sets added to this set through my freebie collection.

Rem.: This is the environment set. V4 or M4, clothing, hair and creatures are not included.

“Inject the liquid, pal!”

 

 

2260 SciFi Series, Products

Product: Executive Office 2260

Leave a comment

Original Price: 10.50$

Untitled-1  http://www.renderosity.com/mod/bcs/executive-office-2260/78739

“You reached the upper level, welcome to the board room.”

After running through all the levels of 2260, the large rooms, the corridors, the laboratories, its time to learn about who steers and control your ship, your station, your whats-o-ever. This is the executive floor, the residential of your president or your company leader, or whomever. . ….

The set is build in four large room parts, P1-P4, all with separated walls, ceiling and floor, boned in a figure, so you can easily disable the part you dont need. No bothering with short lenses – just shoot with long focal lenses and make realistic shoots.

Out of the box, this set contains:

Figures:
– Room Sections Figures P1 to P4, all separated boned, P1 includes the door, open-able, all parts include ceiling gutters that can open
– A grouped set of chairs for the readers section

Props:
– A Floor Carpet
– A Large Wall Flag
– Small Flags for P3 and P2
– A Main Chair (up and down-able)
– A Main Desk (with open-able trays)
– Side Desks 1 and 2
– A Chair
– the Readers Desk
– A small round table
– a soft chair
– a wooden chair
– a desk lamp
– stuff for the main desk (papers, etc)
– A plant
– a red carpet
– golden separators
– a large stand lamp

Smartprops:
– A notepad for V4 (Left Hand)
– A pen for V4 (Right hand)
– A pen for M4 (Right hand)

Hand Pose
– For the above mentioned M4 Hand

Lights:
(Lights tested in Poser 2010 as well)
– Ambient Lights
– Wall Lamps for P1 to P4
– Ceiling Lamps for P1 to P4
– Door Spot
– Lamp for the Desk
– Lamp for the Standlamp

Poses:
– 8 Poses for M4 (All Specific to this set)
– 16 Poses for V4 (All Specific to this set), the seating poses are for the lower and upper body, so you can combine them
– 2 special Poses for Sanctum Arts Drub and Alpha (Climbing out of the upper gutter)

Cameras:
– nine camera sets

Materials:  (Use the Material Room to apply)
– Three Materials for the Flags
– THree Materials for the Carpet

The Flags and carpet textures are rectangle pictures. You can easily use any flag or picture to apply a texture that works for you.

Poses for Sanctum Arts Drub and Alpha included! Let your president get really scared!

The set is build to fit and work with other sets of the product line. Check my store here for more.

I constantly add freebies and add ons to my products to increase value. Check my website for more stuff.

.The product is designed for Poser use, but we tested in working ok in DAZ 2.3 up.

Rem: V4/M4 Figures, Hair and Clothing not included.

 

 

2260 SciFi Series, Products

Product: Crew Quarters 2260 by 3-D-C

Leave a comment

Original Price: 7.10$

Untitled-1  http://www.renderosity.com/mod/bcs/crew-quarters-2260-by-3-d-c/74247

“Wake up, pilots…. there is a mission out there that
must be accomplished!”

“Attention, squadron 3: You are called to report to duty room!”
Ah, they all know what this means: Get out of the warm bed, get the pilot-suit on and into your cockpit rocketeer!

Here is your staff quarters. A four parted large room, containing 17 beds and plenty of space for social life after a long hard ride in your fighter. With the set you receive boned lockers, all can open their doors separatly through their bones. All wall parts contain morph injects to move the bed curtains separate and the lower trays. Of course, the doors can open as well.

Highly detailed textures allow close up rendering. i.e. the lockers have name insigns, all separate textures, so you can pin your own name on it. Or you can use your picture to pin it to the insight locker poster.

A set of 13 light sets (all in modular way) enlighten your quarters as you wish.

18 poses for M4 and V4 also included for the special settings in this room, such as like standing on the lockers, sitting or lying in bed, or just sitting on the table and have a chat after your mission. (The poses work also well with the 2260 Scifi Bar and Canteen).

Camera sets included for four major spottings.

This is really cheap price entry product to the 2260 Series line, given you a good impression of what you receive for your money. Those sets all go along a general baseline of style and fit to each other.

If you ever whished, making your science fiction story in Poser, this is your perfect start or your environment!

Out of the box, this set contains:

Figures and Props:
– Wall Sets P1 – P4 (Modular Parts fitting to a large room)
– Lockers as figures, placing into each part of the room
– A table set with six seats, all boned so you can move them around freely, but controlled
– A morphable set of a cushion and blanket

Lights:
– A moduler set of 17 light sets for the room

Poses:
– 9 Poses for M4
– 9 Poses for V4

Rem: I recommend using my free poses for M4 and V4 for other setups, check my website for the freebies.

Cameras:
– four camera sets for a dolly cam

The entire set is build in modular way. You only need to load the parts you need.

Wall Parts use morph injects to open the doors, bed curtains and trays on the bottom.
You can also simply assemble this set with my free corridors to connect the other 2260 series sets, or simlpy make your own scenes.

Rem: Victoria 4 or Michael 4 figure, character, clothing or hair not included!
DAZ Studio has been tested. All props and figures load ok. Textures for the lockers must be manually applied.

Up, hurry, Pilot. Or do you need a special invitation….?

 

 

2260 SciFi Series, Products

Product: Reactor 2260 by 3-D-C

Leave a comment

Original Price: 13.10$

Untitled-1  http://www.renderosity.com/mod/bcs/reactor-2260-by-3-d-c/74070

“Attention! We have a serious reactor leak in Sector B!
Go, get the cooling system turned of, so i can shut down the core!”

“You gonna need this!”, i would say! Whether you have a spacecraft, a space station or whatever entity your Poser Sci Fi Universe live in,
you do need a plant to create power or warp your ships through space. Here comes your ultimate Reactor!
This is not just large… no, this is massive, this is huge! The room is devided into four sections, each section is a combination of
three separate wall parts, the floor and the ceiling. This gives you extreme flexibility to assemble and load the pieces needed, or load
them all if you need the entire thing. The core is split into two halfs, plus the inner core in two halfs. All this is done to allow extreme long
focal lense shots or even just to minimize render needs of memory etc.
All wall parts come with separate lights, all in total 16 light sets. 14 poses for M4 and V4 included as well as camera sets.
You see: If you need power, here is your solution!
The entire set fits to the 2260 space series.

Out of the box, this set contains:

Figures and Props:
– Wall sets for sections P1-P4, each of three parts, so all in total 12 Side Walls, all setup to load
to the exact point
– Floors and Ceiling for each Section
– The Outer Core in two pieces, Main and Backside to allow peak in shots
– The Inner Core in two pieces
– The Handrails to the above mentioned wall sets
– A Single nuclear container

Lights:
– Modular Light sets for the various room parts (P1-P4 and Ambient lights) Totally 16 sets
– Lights for the Inner Core

Poses:
– 7 Poses for M4 (all special to the set)
– 7 Poses for M4 (all special to the set)
Rem: I recommend using my free poses for M4 and V4 for other setups, check my website for the freebies.

Cameras:
– seven camera sets for a dolly cam

The entire set is build in modular way. You only need to load the parts you need.

Wall Parts use morph injects to open the doors. You can also simply assemble this set with my free corridors to connect
the other 2260 series sets, or simlpy make your own scenes.

Dont wait any longer until you run out of auxiliry power. This is an urgent need for your facility.

2260 SciFi Series, Products

Product: SciFi Hangar 2260 by 3-D-C

Leave a comment

Original Price: 11.90$

Untitled-1  http://www.renderosity.com/mod/bcs/scifi-hangar-2260-by-3-d-c/73455

“Spacestation Prime, i need to land my spacecraft! I am running out of Antimatter!”
“Spacecraft 91-X, you are clear to land on Hangar Bay AO-989”

Here is the Hangar Bay for your SciFi Scenes. The one bay you had been waiting for, for a low price.
The Bay is build in modular way, so you can easily assemble what you need, or leave that away, that you dont need. That makes long focal lense shots very easy. The Hangar is a complete set of wall sets, objects and figures, that give you so many ways of making your scenes, you may need a while to discover!
Equipped with Light sets and Cameras, basic poses and smartprops, you will not get tired assembling more complex scenes. In alliance with the other sets of the 2260-SciFi Series of 3-D-C this makes a very complete set!

The Hangar comes with the following items:

Product Content
Figures and Props:
– Back Wall Set with injected Morphs to open and close the doors
– Right Wall Set with injected Morphs to open and close the doors
– Left Wall Set with injected Morphs to open and close the doors
– Main Ceiling
– Set of the Left WalkWay
– Set of the Right Walk Way
– Set of the Rear Walk Way
– Front Wall
– Front Gate as Biomechanical Gate with morph to open and close
– Front Gate as Mechanical Gate with morph to open and close
– PinPads for the Left, Right and Backwall
– Handrails for Left, Right and Backwall
– The Backplane as Space background
– The Outside wall for outside shots
– Side Cabin for the lift guy
– Large Spots for the Ceiling and Front
– The Lift Figure: Boned Figure to let you raise and lower the lift platform
– The Crane: A boned figure to let you open the cranefingers, lower and raise the crane and adjust the ropes
– Various Add ons: Container props, Crates, Cubes, Oiltanks, etc.

Poses:
– Five basic poses for M4 (Crane usage, Lift usage, Ship coordination, Walk Stairs up and down)

Lights:
12 different light sets:
– 11 single sets to load in serial way
– 1 set to load all 11 together

Smartprops:
– The jug prop for left and right hand plus the handposes for it

Cameras:
– 11 different camera sets for direct shots in the Hangar

Materials:
– 4 different materials for the background plane

Still not convinced, privateer?

Take a look at the sample renders. All renders are pure 100% Poserwork, no postwork done.

I constantly create new add ons and freebies for my products. Check the 2260 product line for more info. This product will gain value over time!

Remark: Spaceships, V4/M4 model, clothing and hair not included

Ships used in this samples:

XHR3 Ship by Simon 3D , avaliable here on Renderosity
Tengu Fighter by Simon 3D , avaliable here on Renderosity
Vanguard Ship, avaliable on DAZ3D

2260 SciFi Series, Products

Product: SciFi Bar and Canteen 2260 by 3-D-C

Leave a comment

Original Price: 11.50$

Untitled-1  http://www.renderosity.com/mod/bcs/scifi-bar-and-canteen-2260-by-3-d-c/73119

“Live is hard enough!”, William said.
“Lets get some drinks and Fun in the Neptuns Bar on Aplha Prime!”

Your search is over, Privateer! Finally we opened our first Bar to give all of you unrestful travellers in space a place to rest and
have a pint.
The Neptuns Bar is a huge place, build in modular way, so you can assemble the parts you need, place the items where you
which and create a complete individual space for your space-cowboys. Dont waste time in looking for single items to be
assembled. This is the one you need, bountyhunter!

Out of the box, this set contains:

Figures and Props:
– seven room parts in modular build (Check the below product pictures for a schematic view)
– boned tabled figure, single and in set. The chairs are boned items, so you have one figure with bones to move the chairs
Very easy to handle
– Set of relaxing couches, as set and as single
– A Bar
– A stool Figure for the bar, the stools are boned items so you can move them along
– a stage prop plus a separate pole for some sexy strip dance
– Ball light props
– Round standing tables as set and as single
– Posters for the Walls
– Bottles for the bar
– Smart Props (A drinking glas and a beer bottle)
– Room parts with Doors can open the doors through a morph inject
– The windowd room parts can open and close the blindings
– Two Individual Bar Signs “Neptuns Bar” and “Venus Inn”

Lights:
– Modular Light sets for the various room parts (P1-P7)
– Ball Lights
– Stage Lights
– Bar Lights
– Sign Lights
– Sun Lights

Poses:
– 23 Poses for M4 and V4
– 6 Special Pole Dancer Poses

Cameras:
– different Cameras spotting to various areas of the Bar

The entire set can be reassembled and used as a SciFi Canteen as well. So you can assemble stools, chairs and use one of the over
30 boxed poses to make this look like a star carrier canteen.

This package is so packed with stuff, you probably need a while to find it all out. Really a lot of value for your space credits, privateer!

The set corresponds to our other SciFi 2260 Series Products such as the Medical Sick Bay and the 2260 Apartment.
The modularity of the set makes it easy to work even with long focal lenses and keeps rendering memory low as you
only need to load and apply the set parts you need.
The set has been defined to work with even lower render settings and should still then deliver good quality.
Its designed to work in Poser 6 upward. It may work in D/S 3, however, its not supported through 3-D-C. We did D/S Testing,
and found all objects etc run fine. However, one shader has been Poser exclusive but you may not recognize.

2260 SciFi Series, Products

Product: Medical Laboratory & Sick Bay

Leave a comment

Original Price: 13.10$

Untitled-1  http://www.renderosity.com/mod/bcs/medical-laboratory-sick-bay/72795

Welcome to our Laboratory on Mars. This is our SciFi Lab and Sick Bay of the 2260 Series.
This modular environment set is build for maximum comfort use. All wall and room sections
are divided into six parts, so you can assemble whatever section of the laboratory you need.

Multiple props will give you an immidiate, effective start to your medical career. And even if you
loose a patient in a critical surgery, resurrect them in your resurrection pipes.

The set comes with the six modular room portions and include the following parts:

– 6 Parts for the Room (P1 to P6, see next pictures), with moveable doors
– 6 Parts of the Air Ventilation System
– 4 Screens to be adopted to the Room Parts
– 4 Sets of lockers to be adopted to the Room Parts, boned, you can open each single door
– Investigation Table, with two Arms, each with four moveable parts, boned figure
– Resurrection Pipes, boned to open left and right glass door, and raise and lower the fill
– Light Props for the inner section
– Single Bed with Injected Morph to raise and lower the head section
– Desk with injected morphs to eject each single tray
– Desk Stuff (PC and Papers)
– Chair with Morph to raise and lower and lay back
– Medical Machine for the wall Part P2

To enlight your environment you receive nine light sets, which can all be loaded in
incremental order:

– Neon Lights for the inner set
– an surrounding light set
– one light set per room part (P1-P6)

To easy your first renders, we included five camera sets

You also receive:
– 10 poses for M4 and V4

The set has been designed for Poser, but will work in D/S as well. Standard Tests have been performed.

So, dont let your urgent surgery wait! Get your characters in and get them medical treatment! Now!

Renders shown here are partly external renders. All Objects had been designed for Poser or DAZ.