Tag Archives: hangar

General SciFi, Products, SpaceTech

SpaceTech: Hangar

Leave a comment

 

Original Price: 13.99$

https://www.renderosity.com/mod/bcs/spacetech-hangar/120230/

In line with our SpaceTech Series, you herewith receive our next product in line:

The Inside Hangar

Working with SciFi Ships i came across the issue that there was a lack of hangars out there that where big enough to host the “large” Ships, something that
doesnt look as too new and shiny but something that would be working with the SpaceGate Product and Space Station Outposts from me.

The hangar you receive in this product is large enough to hosts ships such as like the Rapita or multiple smaller ships at once.

It is build with detail but still leaves you enought capacity to put enough people and ships into your scene.

The Product is build of separate props mounted to an overall structure holder so you can easily disassemle items or remove them if not needed.
Walls contain morphs to open and close doors. The doors at the side mount to the Ship Elements D-Sector Series.

Included in the pack are light sets and camera presets as well as a preset scene.

Included in Pack:

Figures:
– Structure holder
– Preassembled Hangar

Props:
– All props as single items: Sidewalls (with and without Doors), Frontwall, Backwall, Sideback Walls, Sideback Up Walls, Panels, Main Door, Floor etc.

Lights:
– All single lights
– Full Light Set

Cams:
– 4 preset cams

Scenes:
– Full preset scene

rem: Item is build for Poser, loads ok in D/S with some limitations (see read me)

check out our other SpaceTech and SpaceCraft Items and our huge store and freebie area.

thanks for using our products

 

K-Azonica Series, Products

Product: The Gate by 3-D-C (K-Azonica Series)

Leave a comment

Original Price: 8.50$

Untitled-1  http://www.renderosity.com/mod/bcs/the-gate-by-3-d-c/83140… open the gate to a new sector….

Coming a long way through all this quadrants in K-Azonica, we now reach the gate
to a new sector. Passing through will get you further.

We present you the fourth set of K-Azonica:

The Gate

a versatile set of a Gate section, whether you use it as
security gate, airlock, generator lock or whatsover.

In order to keep working with the set simple, you get also 12 poses for
M4 and V4 (6 each), four initial light sets and camera presets.

It is build in modular way, easy to use, and it fits the corridor set.
The outer Doors have an adopted wall with door to fit the straight part
of the corridor/room construction set. It is not needed for this set, the Gate is
a standalone item.

Included in the package are
Figures:
– The Core Body of the room
– The Main Front Door (With Masterdial injected. The middle door opens first, then the  other three parts slide into the frame)
– Same door for the backside of the Tube
– The Leftwalls with Doors (Also with masterdials to open and to eject the panels)
– The RIght Walls (Generator Walls)

Props:
– The Main Front Wall
– Main Back Wall
– The Tube
– The Platform with Console
Lights:
– All Ambient Lights
– Main Ceiling Lights
– Tube Lights
– Backwall Lights

Poses:
– 12 Poses specific for this set, 6 for M4 and 6 for V4
– We recommend to download out free pose sets from out website as they work perfect for this set

Cameras:
– 9 Cameras (for a Dolly Cam)

Also check the freebies avaliable from 3-D-C that will give you loads of poses and props that work perfect with this set.

There are much more freebies avaliable that work perfekt with this set!!

Check my Freebie section on Renderosity

Note: This is the equipment set! V4/M4 Figure, Clothing or Hair not included. Package will also gain value. Check my freebie section on my website for more add ons

A Manual is included to explain best practise and working with this set.

Check out the other K-Azonica Sets.

Remark and known limitations: This product is designed to produce best output in Poser 8 and Poser 2010. It works on Poser 7 (tested) but the masterdial of the frontdoor behaves a little different, however you can use the manual boned tweaks. It is possibly to work on DAZ and Poser 6, however we do not provide support for those. We tested the product in DAZ and all items load ok, however, the masterdials are not supported by DAZ, also the lights are not build for DAZ as well.

.. make your trip now to K-Azonica … and stay …

 

 

K-Azonica Series, Products

Product: SciFi Multi-Room (K-Azonica Series)

Leave a comment

Original Price: 13.10$

Untitled-1  http://www.renderosity.com/mod/bcs/scifi-multi-room/86215

… somwhere in between….

There is always a room in between the chapters,
here you have your multipurpose room you wanted.

We present you another set of K-Azonica:

The M-Room

a versatile set of a room that can be assembled into

a Hangar Bay

a Vent Room

a simple walkway room

whatever you might think of ….

Comes as a lot of props assembbling a room of multipurpose. All Items are separate items to safe
memory space and easy the use. We have also put 24 poses for M4 and V4 into it. Also Lights that
associate to the room. Additional cams complete this set. Let you start right away into the room
in between…

Included in the package are

Props:
– Backwall with injected morphs to open door
– Railcloser for Backwall
– Bottom Part Main
. Bottom Part Closed
– Bottem Part Opened
– Energy Clutch Lower
– Energy Clutch Upper
– Frontwall with injected morphs to open door
– Railcloser for Frontwall
– Landing Plane for Hangar
– Left Wall Venting
– Left Wall Venting Fan
– Lightning
– Railwalk Middle
– Railwalk Middle Plane
– Right Wall Hangar
– Right Wall Vent
– Right Wall Vent Fan
– Turbolift
– Turbolift Inner
– Upper Main
– Upper Closed
– Upper Open

Lights:
– All Ambient Lights
– Bottom Main Spots
– Doorlights Backwall
– Doorlights Frontwall
– Hangar Lights
– Lightning
– Sidelights Backwall
– Sidelights Frontwall
– Spots Upper

Poses:
– 24 Poses specific for this set for V4
– 24 Poses specific for this set for M4

Cameras:
– 12 Cameras (for a Dolly Cam)

Also check the freebies avaliable from 3-D-C that will give you loads of poses and props that work perfect with this set:::

There are much more freebies avaliable that work perfekt with this set!!
Check my Freebie section on Renderosity

Note: This is the equipment set! V4/M4 Figure, Clothing or Hair not included. Package will also gain value. Check my freebie section on my website for more add ons

A Manual is included to explain best practise and working with this set.

Check out this other K-Azonica Sets:

Remark and known limitations: This product is designed to produce best output in Poser 8 and Poser 2010. It is possibly to work on DAZ and Poser 6, however we do not provide support for those. We tested the product in DAZ and all items load ok, however, the lights are not build for DAZ as well.

 

 

2260 SciFi Series, Products

Product: SciFi Hangar 2260 by 3-D-C

Leave a comment

Original Price: 11.90$

Untitled-1  http://www.renderosity.com/mod/bcs/scifi-hangar-2260-by-3-d-c/73455

“Spacestation Prime, i need to land my spacecraft! I am running out of Antimatter!”
“Spacecraft 91-X, you are clear to land on Hangar Bay AO-989”

Here is the Hangar Bay for your SciFi Scenes. The one bay you had been waiting for, for a low price.
The Bay is build in modular way, so you can easily assemble what you need, or leave that away, that you dont need. That makes long focal lense shots very easy. The Hangar is a complete set of wall sets, objects and figures, that give you so many ways of making your scenes, you may need a while to discover!
Equipped with Light sets and Cameras, basic poses and smartprops, you will not get tired assembling more complex scenes. In alliance with the other sets of the 2260-SciFi Series of 3-D-C this makes a very complete set!

The Hangar comes with the following items:

Product Content
Figures and Props:
– Back Wall Set with injected Morphs to open and close the doors
– Right Wall Set with injected Morphs to open and close the doors
– Left Wall Set with injected Morphs to open and close the doors
– Main Ceiling
– Set of the Left WalkWay
– Set of the Right Walk Way
– Set of the Rear Walk Way
– Front Wall
– Front Gate as Biomechanical Gate with morph to open and close
– Front Gate as Mechanical Gate with morph to open and close
– PinPads for the Left, Right and Backwall
– Handrails for Left, Right and Backwall
– The Backplane as Space background
– The Outside wall for outside shots
– Side Cabin for the lift guy
– Large Spots for the Ceiling and Front
– The Lift Figure: Boned Figure to let you raise and lower the lift platform
– The Crane: A boned figure to let you open the cranefingers, lower and raise the crane and adjust the ropes
– Various Add ons: Container props, Crates, Cubes, Oiltanks, etc.

Poses:
– Five basic poses for M4 (Crane usage, Lift usage, Ship coordination, Walk Stairs up and down)

Lights:
12 different light sets:
– 11 single sets to load in serial way
– 1 set to load all 11 together

Smartprops:
– The jug prop for left and right hand plus the handposes for it

Cameras:
– 11 different camera sets for direct shots in the Hangar

Materials:
– 4 different materials for the background plane

Still not convinced, privateer?

Take a look at the sample renders. All renders are pure 100% Poserwork, no postwork done.

I constantly create new add ons and freebies for my products. Check the 2260 product line for more info. This product will gain value over time!

Remark: Spaceships, V4/M4 model, clothing and hair not included

Ships used in this samples:

XHR3 Ship by Simon 3D , avaliable here on Renderosity
Tengu Fighter by Simon 3D , avaliable here on Renderosity
Vanguard Ship, avaliable on DAZ3D