Category Archives: K-Azonica Series

K-Azonica Series, News and Posts
Leave a comment

main 2

Well, most of you may know, i originally started with 3D cause i wanted to write a story. I began to write “K-azonica” a while ago. In the past month´, i just got stuck in modelling and couldnt continue writing.

Then, the old page didnt work out as i wanted to, i had to find a new place.

Since i am on wordpress now already anyhow, i just decided to make K-Azonica a wordpress blog. So i can blog the story parts just as i write them. Which is much easier anyway.

I just started with the first section of chapter1. I need to re-up all the stuff, but it may be a good chance for you to catch up on the story as i move along. So take a chance and read. 😉

http://www.k-azonica.com

General SciFi, Horror, Underworld and Medivial, K-Azonica Series, Products

Product: Alien Room-Corridor Construction Set by 3-D-C

Leave a comment

Original Price: 9.99$

Untitled-1  http://www.renderosity.com/mod/bcs/alien-room-corridor-construction-set-by-3-d-c/86827… welcome to Zheta….

At some stage in your journey, you will once reach the Alien Planets…
Have you been looking for a versatile set to construct an

… Alien Ship …
… Alien Station …
etc etc etc ??

Here you go: This is the The Alien Room/Corridor Construction Set!

A versatile set to construct anything from narrow corridors to
large rooms in Alien Style.
Comes with three add on mat sets, add on props, poses for V4 and M4,
lights, well anything you need to start of quickly.

Transform walls into a liquid alien housing, spider-web style doors that
open strangly, etc. If you have searched for anything like this, here is
your final solution.

As we add on freebies to our products, this will increase in value, so
stay tuned!!

Included in the package are

Figures:
– Straight part (with boned walls and parts: Straight Wall, Door Wall, Housing Wall, Piped Wall)
– T-Part  (with boned walls and parts: Straight Wall, Door Wall, Housing Wall, Piped Wall), Corners can be adopted to
be plain
– X-Part Corners can be adopted to
be plain
– Curve  Corners can be adopted to
be plain
Props:
–  Middle Pillar
– Sign Upper
– Sign Side

Lights:
– Ambient Lights
– Upper Lights w/o IBL
– Upper Lights with IBL
– Down Lights w/o IBL
– Down Lights with IBL

Poses:
– 6 Poses for M4 (Specific for this set, more poses through our freebie service)
– 6 Poses for V4 (Specific for this set, more poses through our freebie service)
– Part Preset poses for every part named above

Materials:
– Mat Poses for the parts above for Grey/Green, Blue and Red preset

Also check the freebies avaliable from 3-D-C that will give you loads of poses and props that work perfect with this set:::

There are much more freebies avaliable that work perfekt with this set!!
Check my Freebie section on Renderosity

Note: This is the equipment set! V4/M4 Figure, Clothing or Hair not included. Package will also gain value. Check my freebie section on my website for more add ons

A Manual is included to explain best practise and working with this set.

Check out this other K-Azonica Sets:

Remark and known limitations: This product is designed to produce best output in Poser 8 and Poser 2010. It works on Poser 7 (tested) but the masterdial of the frontdoor behaves a little different, however you can use the manual boned tweaks. It is possibly to work on DAZ and Poser 6, however we do not provide support for those. We tested the product in DAZ and all items load ok, however, the masterdials are not supported by DAZ, also the lights are not build for DAZ as well.

.. make your trip now to K-Azonica … and stay …

 

 

K-Azonica Series, Products

Product: SciFi Metro by 3-D-C (K-Azonica Series)

Leave a comment

Original Price: 9.99$

Untitled-1  http://www.renderosity.com/mod/bcs/scifi-metro-by-3-d-c/82611a new worlds journey

… mind the gap….

3-D-C is producing a new series of SciFi Products. Different than the 2260 Series, this will be modern, new,
well, simply another style. Inspired through various things, we began to write the story of K-Azonica. A
world beyong our present, somewhere in the future, after we had to leave earth and seek out new
space and planets to life, the ark arrived after an endless journey. It took long to settle down and build
our society, keep up the technology and develop ourselves. Here we are, in the year 319.

We present you the second set of K-Azonica:

The Metro Station

an extreme complete and versatile set of a turbo metro;
connecting the various quadrants and sectors of K-Azonica.
or whatever you want to use it for.

It is build in modular way, easy to use, and it fits the corridor set.
The outer Doors have an adopted wall with door to fit the straight part
of the corridor/room construction set. It is not needed for this set, the Metro is
a standalone item.

Included in the package are
Figures:
– The Metro itself (with boned parts: the side, the front and back and doors 1 to 3) you can disable the different parts to allow
long focal shots

Props:
– Left Wall (with Door-Morph and Panel Morph)
– Right Wall (with Door-Morph and Panel Morph)
– Back Wall (with Door-Morphs and Panel Morphs)
– Ceiling
– Main Floor
– Middle Floor
– Front Part
– Tube
– Advertising Screens
– Wall Screen ( with injected morph to alter the display and mount it to the wall)
– Seats for the middle floor
Smartprops
– A carry case for M4
– A newspaper (held in hand)
– A wrapped newspaper (in hand)

Lights:
– All Ambient Lights
– Front Part Spots
– Ceiling Spots
– Side Wall Right Lights
– Side Wall Left Lights
– Back Wall Lights
– Lights for the Inner Metro
– Daylight

Poses:
– 25 Poses for M4 and V4 all specific to this set
– 4 poses to open and close the doors of the Metro
– We recommend to download out free pose sets from out website as they work perfect for this set
Material:
– Background Mat for a blurred background

Cameras:
– 11 Cameras (for a Dolly Cam)

Also check the freebies avaliable from 3-D-C that will give you loads of poses and props that work perfect with this set.

As i am usually upgrading my products with new additions over time, this package will also gain value. Check my freebie section on my website for more add ons.

Note: This is the equipment set! V4/M4 Figure, Clothing or Hair not included. Package will also gain value. Check my freebie section on my website for more add ons

A Manual is included to explain best practise and working with this set.

Check out this other K-Azonica Sets:
The Corridor and Room Construction Set

Rem: This Product works with Poser 5 upward, however, you receive best results in Poser 8 or 2010 due to indirect lightning.
DAZ Studio might work but is not fully supported. We tested all Props and figures to load OK. However, the lights do
not 100% produce the same output.

.. make your trip now to K-Azonica … and stay …

 

 

K-Azonica Series, Products

Product: SciFi Apartment by 3-D-C (K-Azonica Series)

Leave a comment

Original Price: 9.99$

Untitled-1  http://www.renderosity.com/mod/bcs/scifi-apartment-by-3-d-c/82871

a new worlds journey  … a new home….

3-D-C is producing a new series of SciFi Products. Different than the 2260 Series, this will be modern, new, well, simply another style. Inspired through various things, we began to write the story of K-Azonica. A world beyong our present, somewhere in the future, after we had to leave earth and seek out new space and planets to life, the ark arrived after an endless journey. It took long to settle down and build our society, keep up the technology and develop ourselves. Here we are, in the year 319.

We present you the third set of K-Azonica: The Apartment

well, even we might leave earth at some stage, we still need to find ourselves a new home. This is a comfortable apartment, with mostly all you need to live a reasonable live. Versatile and build with maximum usability.
——————————————–
Included in the package are
Figures:
– The Main Living Room Front (With injected master dials to open all doors, move tables etc)
– The Main Living Room Back (With injected master dials to open all doors, move tables, close windows etc)
– The Ceiling and Floor for the Living Room and Kitchen
– The Sleeping Room Backside ((With injected master dials to open all doors and close window)
– The Bathroom ((With injected master dials to open all doors, move the toilet seat and sitting area and open the glas door)
– The Ceiling and Floor to the bath and sleeping room

Props:
– A table
– A Stool/Chair
– A blanket for the bed (With two injected Morphs)
– A cushion for the bed (with injected morph)
– Decoration Stuff for the rooms
– the bed

Lights:
–  All in total 10 sets, including Sunlights and modular lights for all possible options.

Poses:
– 10 Poses for M4
– 11 Poses for V4
– 11 Poses for S4
– We recommend to download out free pose sets from out website as they work perfect for this set

Material:
– 25 Sets for loading different floor combinations
– 10 Sets for chaning the lights (Floor, Ceiling, Upper, Side lights)

Cameras:
– 12 Cameras (for a Dolly Cam)

——————————————
Also check the freebies avaliable from 3-D-C that will give you loads of poses and props that work perfect with this set.
——————————————

As we are usually upgrading our products with new additions over time, this package will also gain value. Check our freebie section on my website for more add ons.
——————————————

Note: This is the equipment set! V4/M4 Figure, Clothing or Hair not included.

A Manual is included to explain best practise and working with this set.
——————————————

Check out the other K-Azonica Sets
——————————————
Att Poser 7 and pre users: There is a patch avaliable for these older versions. Please check the link: http://www.renderosity.com/mod/blog/index.php?comment&postid=3825

Rem: This Product works with Poser 5 upward, however, you receive best results in Poser 8 or 2010 due to indirect lightning.
DAZ Studio might work but is not fully supported. We tested all Props and figures to load OK. However, the lights do not 100% produce he same output. Also, the master dials injected do not work in DAZ, you need to adjust the bones manually

.. make your trip now to K-Azonica … and stay …

 

 

K-Azonica Series, Products

Product: The Gate by 3-D-C (K-Azonica Series)

Leave a comment

Original Price: 8.50$

Untitled-1  http://www.renderosity.com/mod/bcs/the-gate-by-3-d-c/83140… open the gate to a new sector….

Coming a long way through all this quadrants in K-Azonica, we now reach the gate
to a new sector. Passing through will get you further.

We present you the fourth set of K-Azonica:

The Gate

a versatile set of a Gate section, whether you use it as
security gate, airlock, generator lock or whatsover.

In order to keep working with the set simple, you get also 12 poses for
M4 and V4 (6 each), four initial light sets and camera presets.

It is build in modular way, easy to use, and it fits the corridor set.
The outer Doors have an adopted wall with door to fit the straight part
of the corridor/room construction set. It is not needed for this set, the Gate is
a standalone item.

Included in the package are
Figures:
– The Core Body of the room
– The Main Front Door (With Masterdial injected. The middle door opens first, then the  other three parts slide into the frame)
– Same door for the backside of the Tube
– The Leftwalls with Doors (Also with masterdials to open and to eject the panels)
– The RIght Walls (Generator Walls)

Props:
– The Main Front Wall
– Main Back Wall
– The Tube
– The Platform with Console
Lights:
– All Ambient Lights
– Main Ceiling Lights
– Tube Lights
– Backwall Lights

Poses:
– 12 Poses specific for this set, 6 for M4 and 6 for V4
– We recommend to download out free pose sets from out website as they work perfect for this set

Cameras:
– 9 Cameras (for a Dolly Cam)

Also check the freebies avaliable from 3-D-C that will give you loads of poses and props that work perfect with this set.

There are much more freebies avaliable that work perfekt with this set!!

Check my Freebie section on Renderosity

Note: This is the equipment set! V4/M4 Figure, Clothing or Hair not included. Package will also gain value. Check my freebie section on my website for more add ons

A Manual is included to explain best practise and working with this set.

Check out the other K-Azonica Sets.

Remark and known limitations: This product is designed to produce best output in Poser 8 and Poser 2010. It works on Poser 7 (tested) but the masterdial of the frontdoor behaves a little different, however you can use the manual boned tweaks. It is possibly to work on DAZ and Poser 6, however we do not provide support for those. We tested the product in DAZ and all items load ok, however, the masterdials are not supported by DAZ, also the lights are not build for DAZ as well.

.. make your trip now to K-Azonica … and stay …

 

 

K-Azonica Series, Products

Product: SciFi Bar by 3-D-C (K-Azonica Series)

Leave a comment

Original Price: 9.89$

Untitled-1  http://www.renderosity.com/mod/bcs/scifi-bar-by-3-d-c/83447… VIPs only….

Even in K-Azonica, live can become boring. You need a place
where you can rest, have a good drink, some good food and a good
chatty time with the other Galaxy Pirates, right?

We present you the fourth set of K-Azonica:

The SciFi Bar; the Buccaneers Den

a versatile set of a bar, made for serving food and drinks,
but also prepared with a stage section.

This set comes with a lot of stuff in it. We have made 19 poses for V4 and M4, table poses,
4 hand poses and smartprops for serving food having drinks and whiping the desks,
various props and dedicated light sets.

This set works together with the SciFi Corridor Construction set and
has the same outside door as usually used. Also the look-alike is with the
Other K-Azonica Sets, so it all fits together…

A complete Manual how to use this set is included.

Included in the package are
Figures:
– The Core Body of the room (devided into two sections, so you need to load only what you really need)
– A table set with boned chairs

Props:
– Floor Inner
– Floor Outer
– Main Ceiling
– Bar Main
– Bar MIddle
– Bar Stool
– A Dancing Pole
– A Microphone
– Sign for the Backwall

Smartprops:
– Drink for V4
– Drink for M4
– whiper for M4
– Serving Tablet for V4
Lights:
– All Ambient Lights
– Daylight
– Lights for section P1-P7
– Lights for section P8-P14
– Stage Lights
– Bar Lights Inner
– Bar Lights Upper

Poses:
– 19 poses for V4 and M4
– Table Poses to place the tables corretly

Cameras:
– 20 Cameras (for a Dolly Cam)
– 2 Cameras (for a Top Cam, for setup)

Also check the freebies avaliable from 3-D-C that will give you loads of poses and props that work perfect with this set.

Note: This is the equipment set! V4/M4 Figure, Clothing or Hair not included. Package will also gain value. Check my freebie section on my website for more add ons

A Manual is included to explain best practise and working with this set.

Check out this other K-Azonica Sets:
The Gate, The Apartment, The Corridor Construction Set and the Metro

Remark and known limitations: This product is designed to produce best output in Poser 8 and Poser 2010. It works on Poser 7 (tested) but the lights are looking a little different due to the fact that P7 cannot emulate indirect light. This product loads in DAZ with the usual limitations of lights and cameras.
The Masterdials only work in Poser 7 upward. All items are set to limitations so you can move only how it is designed to move.

.. make your trip now to K-Azonica … and stay …

 

 

K-Azonica Series, Products

Product: SciFi Security Office and Arrest Cell (K-Azonica Series)

Leave a comment

Original Price: 10.80$

Untitled-1  http://www.renderosity.com/mod/bcs/scifi-security-office-and-arrest-cell/83799… we finally got ‘er!….

The Security in our world is in danger! The K-Azonica police cannot guarantee our
safety! So, we formed the Security Office. The guardian of our souls
and the watchmen of night.

We present you the sixt set of K-Azonica:

The Security Office and the Arrest Cell

a versatile set of three rooms, fitting together to build a flexible
imprisonment. No good time for the evil ones in our world.

As like all our sets, this set is completetly stuffed with props, lights, cams
and 32 poses for M4, V4 and S4.

We also deliver you two smartprops for M4 and V4: Handcuffs.

A complete Manual how to use this set is included.

Included in the package are
Figures:
– The Main Room boned into parts, so you can disable every single wall. Doors and Windows can close, Masterdials injected for easy usage
– The Corridor Part without an end. You can extend the corridor, just by loading it twice. All doors are boned as well as the walls. Decide which type of door you want to use…
– The Arrest Cell. Boned in parts, disable any wall you whish. the Bed, the Window and the clothing board can animate.

Props:
– The Corridor Back Part
– an empty table
– a table with three PCs
– a desk lamp
– papers for the desk
– Security Camera for Cell
– Security Camera for Corridor
– Flag for the Wall
– Bigger Chair
– Smaller Chair

Smartprops:
– Handcuffs for V4
– Handcuffs for M4

Lights:
– All Ambient Lights
– Main Room Upper Lights
– Corridor Upper Lights
– Cell Toilet and Shower Lights
– Cell Side lights
– Cell Upper Lights

Poses:
– 32 Poses for M4, V4 and S4
– 3 Set poses for Doors and Cell

Cameras:
– 15 Cameras (for a Dolly Cam)

Also check the freebies avaliable from 3-D-C that will give you loads of poses and props that work perfect with this set.

Note: This is the equipment set! V4/M4 Figure, Clothing or Hair not included. Package will also gain value. Check my freebie section on my website for more add ons

A Manual is included to explain best practise and working with this set.

Check out this other K-Azonica Sets, avaliable here in the marketplace.

Remark and known limitations: This product is designed to produce best output in Poser 8 and Poser 2010. It works on Poser 7 (tested) but the lights are looking a little different due to the fact that P7 cannot emulate indirect light. This product loads in DAZ with the usual limitations of lights and cameras.
The Masterdials only work in Poser 7 upward. All items are set to limitations so you can move only how it is designed to move.

.. make your trip now to K-Azonica … and stay …

 

K-Azonica Series, Products

Product: SciFi Science Lab by 3-D-C (K-Azonica Series)

Leave a comment

Original Price: 9.95$

Untitled-1  http://www.renderosity.com/mod/bcs/scifi-science-lab-by-3-d-c/84557… Evolution must move on! …

We had been researching since ages, but havent got to the point of the next evolution step.
This has changed. Our K-Azonica Scientists present you

The Science Lab

A complete modular science lab room, with all equipment to run some
sucessful tests on your subjects. The room is build in modular way,
so you can easily enable or disable anything you need or dont need.

Within this set you also get a Cryo Chamber with liquid to fill,
Medical Table with moveable leg and arm parts, scanners, lights, simply all
you need, professor!

The set comes with Lights, Cams, Props and like all
our sets, with Poses for M4 and V4/S4.

A complete Manual how to use this set is included.

Included in the package are
Figures:
– The Main Room boned into parts, so you can disable/enable the walls (Ceilings, Floors, etc)
– A Cryo Chamber, boned Door and Liquid
– The Medical Table, boned legs and arm parts, boned Scanner Tops, injected dials to move around
– The Large Lights, with masterdials to move
Props:
– Chair
– Closed Desk (Empty)
– Open Desk (With PCs)
– Lamp
– Desk Papers
– Microscope

Lights:
– All Ambient Lights
– Main Room Upper Lights
– Sidelights
– Investigation Lights
– Sunlight

Poses:
– 29 Poses for M4/S4/V4
– Poses for the Tubes and Table to place them

Cameras:
– 7 Cameras (for a Dolly Cam)

Materials:
– 2 Background Materials

______________________________________________

There are much more freebies avaliable that work perfekt with this set!!
Check my Freebie section on Renderosity

______________________________________________

Note: This is the equipment set! V4/M4 Figure, Clothing or Hair not included. Package will also gain value. Check my freebie section on my website for more add ons

A Manual is included to explain best practise and working with this set.

Check our other K-Azonica Sets here in the Marketplace.

______________________________________________
Remark and known limitations: This product is designed to produce best output in Poser 8 and Poser 2010. It works on Poser 7 (tested) but the lights are looking a little different due to the fact that P7 cannot emulate indirect light. This product loads in DAZ with the usual limitations of lights and cameras.
The Masterdials only work in Poser 7 upward. All items are set to limitations so you can move only how it is designed to move.

.. make your trip now to K-Azonica … and stay …

 

 

K-Azonica Series, Products

Product: SciFi Multi-Room (K-Azonica Series)

Leave a comment

Original Price: 13.10$

Untitled-1  http://www.renderosity.com/mod/bcs/scifi-multi-room/86215

… somwhere in between….

There is always a room in between the chapters,
here you have your multipurpose room you wanted.

We present you another set of K-Azonica:

The M-Room

a versatile set of a room that can be assembled into

a Hangar Bay

a Vent Room

a simple walkway room

whatever you might think of ….

Comes as a lot of props assembbling a room of multipurpose. All Items are separate items to safe
memory space and easy the use. We have also put 24 poses for M4 and V4 into it. Also Lights that
associate to the room. Additional cams complete this set. Let you start right away into the room
in between…

Included in the package are

Props:
– Backwall with injected morphs to open door
– Railcloser for Backwall
– Bottom Part Main
. Bottom Part Closed
– Bottem Part Opened
– Energy Clutch Lower
– Energy Clutch Upper
– Frontwall with injected morphs to open door
– Railcloser for Frontwall
– Landing Plane for Hangar
– Left Wall Venting
– Left Wall Venting Fan
– Lightning
– Railwalk Middle
– Railwalk Middle Plane
– Right Wall Hangar
– Right Wall Vent
– Right Wall Vent Fan
– Turbolift
– Turbolift Inner
– Upper Main
– Upper Closed
– Upper Open

Lights:
– All Ambient Lights
– Bottom Main Spots
– Doorlights Backwall
– Doorlights Frontwall
– Hangar Lights
– Lightning
– Sidelights Backwall
– Sidelights Frontwall
– Spots Upper

Poses:
– 24 Poses specific for this set for V4
– 24 Poses specific for this set for M4

Cameras:
– 12 Cameras (for a Dolly Cam)

Also check the freebies avaliable from 3-D-C that will give you loads of poses and props that work perfect with this set:::

There are much more freebies avaliable that work perfekt with this set!!
Check my Freebie section on Renderosity

Note: This is the equipment set! V4/M4 Figure, Clothing or Hair not included. Package will also gain value. Check my freebie section on my website for more add ons

A Manual is included to explain best practise and working with this set.

Check out this other K-Azonica Sets:

Remark and known limitations: This product is designed to produce best output in Poser 8 and Poser 2010. It is possibly to work on DAZ and Poser 6, however we do not provide support for those. We tested the product in DAZ and all items load ok, however, the lights are not build for DAZ as well.

 

 

K-Azonica Series, Products

Product: SciFi Loft Apartment (K-Azonica Series)

Leave a comment

Original Price: 9.99$

Untitled-1  http://www.renderosity.com/mod/bcs/scifi-loft-apartment/89928

… the executives chambers ….

Continuing on the development of the K-Azonica World.
This time, we bring you the Loft Apartment, a very stylish and modern place
for the executives to live and work in. This cool place comes with furniture and
add on props to complete your needs and has poses for M4 and V4 included.
Light sets and Cams let you start right away.

The Loft Apartment

Included in the package are
Figures:
– The main room, boned. All Walls, ceilings, floors etc are separate items and can be hidden
– The table and seat set
– An Add On Hemisphere to surround your world

Props:
– The Bed Props (Bed, Cushions, Blanket) all with morphs to adapt to the poses
– Curtain Prop (with morphs to open)
– Lamp
– decorative middlepart
– Plant
– Platform
– Blinds for P1 (With morphs to open and close)
– Blinds for P2 (With morphs to open and close)

Lights:
–  A Diffuse Light Set
– A Day Light Set, parenting to the Hemisphere
– Spot Lights for P1 – P3

Poses:
– 7 Poses for M4
– 12 Poses for V4
– 3 positioning Poses
Material:
– 25 Sets for loading different floor combinations
– 10 Sets for chaning the lights (Floor, Ceiling, Upper, Side lights)

Cameras:
– 8 Cameras (for a Dolly Cam)

As i am usually upgrading my products with new additions over time, this package will also gain value. Check my freebie section on my website for more add ons.

Note: This is the equipment set! V4/M4 Figure, Clothing or Hair not included.

A Manual is included to explain best practise and working with this set.

Check out this other K-Azonica Sets in our store.

Rem: This Product works with Poser 5 upward, however, you receive best results in Poser 8 or 2010/2012 due to indirect lightning.
DAZ Studio might work but is not fully supported. We tested all Props and figures to load OK. However, the lights do
not 100% produce the same output. Also, the master dials injected do not work in DAZ, you need to adjust the bones manually

.. make your trip now to K-Azonica … and stay …