Original Price: 10.90$

  http://www.renderosity.com/mod/bcs/the-ultimate-restroom-by-3-d-c/71501You are in need for a stylish set of a restroom?
Or a shower Room?
Or a locker room?

Dont waste your time looking around for three different products… here is the ultimate restroom for your Runtime!

The Ultimate Restroom is a room set, which comes as a set of walls (see below images) which you can assemble to fit your need.
You can load or unload walls, so you can make a camera shot with a long focal lense! Exactly what most Artist need.

The Ultimate Restroom is a stylish set, similar to some restrooms in clubs or noble restaurants. But you can also load your stylish showers and apply some water to it … take a second to look at the sample renders how this looks like!

Also, you get over 20 props with this set, including smart props for letting V4 cream her body with lotion after a restful shower. Or want M4 clothing after Sport? No Problem, this set includes over 20 poses for M4 and V4… Three light sets for day and night time complete the set which also includes six camera sets if needed. The materials are setup to support AO settings for faster rendering.

You also get a full PDF User Guideline… Buy now, dont let your Figures wait for some relaxing shower time …. Here are the details of what you get:

Figures:
– Figure of the entire room, assembled with a blue door handle
– Figure of the part !WT part 1 A with a silver handle
– The Shower Row Left as Figure, can open and close all doors separatly through boned doors – Same Row for right
– A separate single Locker, can open and close door through a boned door
– a locker row of eight lockers, all with boned doors
– a toilet row left with boned doors and boned toilet lids (all separatly open and close-able)

Props:

– A Smartprop BodyMilk for V4 with Morph to open and lube milk
– Prop of Wall WT part 1 B
– Prop of Wall WT part 2 A
– Prop of Wall WT part 2 B
– Prop of Wall WT part 3 A
– Prop of Wall WT part 3 B
– Prop of Wall WT part 3 C
– Prop of Wall WT part 3 D
– Prop of Wall WT part 3 D Alternate (with Window) – Background Plane
– A Board with small towels
– An Automat mounted to Wall
– Lights for the various wall sets (can be loaded separatly)
– Small Lamps for the Plants
– Plants – Basket Seats
– Shower Water
– A Sink-Set
– Baskets for Towel Waste
– Wooden Banks

Poses: M4:
– Open Toilet
– OPen Locker
– Stand on Bank
– Before Toilet

V4:
– Enable Shower
– Enter Shower
– Open Toilet
– Flush Toilet
– Lean on Sink
– Lean on Toilet
– Open Toilet
– Lipstick Pose
– Bind Shoes
– CHair Pose 1
– Chair Pose 2
– Chair Pose 3
– Sit on Bank
– Sit on Toilet 1
– Sit on Toilet 2
– Under Shower
– Creaming with lube 1
– 3 Hand POses:
– Pose for holding Body Milk

Lights:
– Day Settings with Sunlight
– Night Settings
– Expanded Night Settings

plus Six Camera views All included to give you an immidiate start! Product is designed for Poser 5 upward, may work in DAZ but not supported. V4 and M4 Figure not included, neither is clothing or Hair. Towel is Oskarssons product “Wrapped”. Thanks for your interest in my products.

Original Price:  10.90$

  http://www.renderosity.com/mod/bcs/the-simple-room—render-essentials/71124Tired of assembled rooms or props which are just to complex for your render or dont give you the design you look for? Seeking for the essentials needed to do your basics? This package is one i did cause i had been looking for so long, for an easy to handle, easy to fit, but still flexible in design surrounding, also light and poses to give my figures a perfect environment to pose in.
The simple room render essenstials is a combinet package of a room toolbox, with all walls needed, windows, curtains or blinds, with six material sets, from simple wallpaper, over tiles, badly worn plaster, fancy 60’s style, and more. All materials can be used in combination, so you can for example load the floor from mat set no1 and the wall mat set from no5. THat gives loads and loads of different designs.
The package includes a lot of other props to let your figures pose on, such as crate, palettes, barrels, a plexi box (with morphs for the size), pipes, and many more.
The package includes as well 19 poses for V4, fitting to the props.
Also, ten light sets will give you a perfect way to lighten the set. So you can immidiatly start over… six camera settings will finish the scene.
Materials are applied through the material room.

Here is a list of what you get within this package:

– Back Wall
– Front Wall
– Left Wall (with Heater)
– Right Wall with normal Window
– Right Wall with large window (and morphs to open the door)
– Floor
– Ceiling
– Curtains (Morphs to adjust lengt and close)
– Blinds (Morphs to swing)
– Long Curtains for the big window
– BackDrop with two images for a city view and a Sun Down
– A Balcony
– Barrel
– A simple bed with 3 materials
– A Bowl (looking rusted)
– A Smart prop, leg chain for V4 (I used this for the “SAW” pic)
– A clothing pane (With morph adjusted so V4 can “hold” it)
– A simple couch (Also two materials for it)
– A crate
– A ceiling Lamp
– A wooden palette
– A rusted pipe
– A morphing plexi box (can adjust widht and high through morphs)
– Materials for the plexi box
– a saw (As smartprop for V4, hand pose included)
– A video lamp (can adjust high and the shutter through morphs)
– 19!! Poses for V4, applying to the location in the “room”
– 10 Light sets for various ambient scenes (Sundown, etc )
– 6 Camera sets

The walls are all separate, so you can simply load or hide the walls you dont need.

I am also constantly adding value through freebies etc, so this product will gain value over time.. Stay tuned for more …!

THe product has been modelled and assembled in Poser pro but works from Poser 5 onward. It has briefly been tested in DAZ.

THanks for interest in my products.

Original Price: 9.95$, Now for 6.47$

  http://www.renderosity.com/mod/bcs/the-office-part-1-by-3dc/70097

Welcome to the Marc Mitchel Company.

Have you ever looked for a realistic office space for your figures to work in?
Ever looked for something that looks like the usual modern offices of today?

The Office – Part 1 is the first Part of Mr. Marc Mitchels Company. It works completly independent. The Office is a set of four main rooms, the corridor, the lift, the meeting room
and a single office (which you can load multiple times). The set contains about 32 props with injected morphs, to animate or change appearance.
THe corridor is setup as figure with doors as bones, so you can open and close. THe meeting room and office contains morphs to swing and open the
blinds. The lift is set with injected morphs to open and close the door.
All props load to the preset location, however, you can simply setup your own office by rearranging them.
Props use low poly where possible to preserve memory space.

THe whole set has been build on a bases to work robust and render quickly. It avoids memory intensive textures for walls or floors, but has detailed
textures on the items where needed. The set comes with 22 poses for V4 and M3 so you can let your office live start immidiatly.
Take a look at the test renders. They had all be done with the preinstalled light and camera sets, no postwork applied.
The Set comes with various different light sets. Your M3 or V4 need to work late? No problem, lights are included…

Smart props, such as a binder, morphable to open and close, or a case for M3 for open and closing and applying to the hands are included as well.

We are working on part 2, which will extend Marc Mitchels company with a coffee kitchen, a larger office for your people to work in and
a women and mens toilet.

Use a new dolly cam for applying the camera sets, so you dont mess up your main camera.

In case you expirience any issues, feel free to contact us.

Look out for the part 2 coming up soon.

V4 or M3, clothes & Hair not included. This product is the office space, poses, lights, cameras and props shown.

Note for DAZ Users: The product was concepted in Poser, works in DAZ Also. However, the product expects the downloads Dir under the program directory. Elsewise you will get requested for the texture directory. Simply confirm the location of the textures. Also: The Background is poser simple prop, i will add an update so this loads correctly for DAZ, but the product itselfs renders fine in DAZ.