Tag Archives: ship

2260 SciFi Series, Products

Product: Command & Control Center 2260

Leave a comment

Original Price: 10.90$

Untitled-1  http://www.renderosity.com/mod/bcs/command-control-center-2260/74835

“Attention! This is the Commander! We have contact at 20, langitude 455.
All fighters, approach!”

Alright, you all waited long enough. The Prometeus is ready for the battle!
Here is your 2260 Command and Control Center. This large place comes in four room parts, with enough consoles and seats to have a competent crew working in. In the center you have the large planning table, a radar grid and a ceiling mounted information console.
What else does a  starship commander need to steer his fleet into a mission?!
The entire product is build with care and to leave you room to assemble and make your own stories. It fits into the overall 2260 schema and the delivered 25 poses for M4 and V4 and the 29! Lights, which all load to the parts assigned make this an easy to handle product.
.

Out of the box, this set contains:

Figures and Props:
– Four Wall Sections for the Room (Two with doors and injected morph to open and close the door)
– Ceilings for the Wall Parts
– Stool sets as figures, so you can easily move the stools around
– The Mid Console with a hologram inject morph
– The upper Information Console  (You can uplift it to let it hide in the ceiling)
– The Radar Grid
– Wall Signs with lights assigned
– Two Smaller tables with a hologram inject morph

Smartprops:
– A binder of a handbook conforming to M4 Left and Right hand (Injected Morph to open and close)
– A Broadcast Phone handset also for M4

Lights:
– Modular light sets of 29 Lights loading to the wall parts. This include
–  Neonlamps UP, Ladders and DOWN
– Console Lights based upon Image Based Lighting
– Lights for the Ceiling Spots
– Floor Lightning
– Mid Table Light
– Radar Light
– Door Lights

Poses:
– 12 Poses for M4 (all special to the set)
– 13 Poses for V4 (all special to the set)
Rem: I recommend using my free poses for M4 and V4 for other setups, check my website for the freebies.

Cameras:
– five camera sets

The entire set is build in modular way. You only need to load the parts you need.

Wall Parts use morph injects to open the doors. You can also simply assemble this set with my free corridors to connect
the other 2260 series sets, or simlpy make your own scenes.

.The product is designed for Poser use, but we tested in working ok in DAZ 2.3 up.

Rem: V4/M4 Figures, Hair and Clothing not included.

 

 

2260 SciFi Series, Products

Product: Airlock 2260

Leave a comment

Original Price: 9.80$

Untitled-1  http://www.renderosity.com/mod/bcs/airlock-2260/75223“Hold on guys! It’s about to get in!”

No, this is not scary, its only an Airlock. But it is the gateway to outer space, or the planet your station is on, or… or … or….
This is the ultimate Airlock you must have been waiting for. Its a room in modular way, so you can simply assemble the parts together as you may need them.
.
.

Out of the box, this set contains:

Figures and Props:
– Wall Parts and Sections to assemble a complete closed room, parts in the front wall sets contain morphs to open the doors
– Ceilings for the Wall Parts
– Floor sets for the parts with Morph Injects to let the gutters slide away
– An inner Airlock System with a large door that opens in two way

Lights:
– Modular Light System of 19 lights applying to the locale
– Upper Lights
– Floor Spots
– Control Lights
– Door Lights

Poses:
– 6 Poses for M4 (all special to the set)
– 6 Poses for V4 (all special to the set)
Rem: I recommend using my free poses for M4 and V4 for other setups, check my website for the freebies.

Cameras:
– nine camera sets

The entire set is build in modular way. You only need to load the parts you need.

Wall Parts use morph injects to open the doors. You can also simply assemble this set with my free corridors to connect
the other 2260 series sets, or simlpy make your own scenes.

.The product is designed for Poser use, but we tested in working ok in DAZ 2.3 up.

Rem: V4/M4 Figures, Hair and Clothing not included.

 

 

2260 SciFi Series, Products

Product: Crew Quarters 2260 by 3-D-C

Leave a comment

Original Price: 7.10$

Untitled-1  http://www.renderosity.com/mod/bcs/crew-quarters-2260-by-3-d-c/74247

“Wake up, pilots…. there is a mission out there that
must be accomplished!”

“Attention, squadron 3: You are called to report to duty room!”
Ah, they all know what this means: Get out of the warm bed, get the pilot-suit on and into your cockpit rocketeer!

Here is your staff quarters. A four parted large room, containing 17 beds and plenty of space for social life after a long hard ride in your fighter. With the set you receive boned lockers, all can open their doors separatly through their bones. All wall parts contain morph injects to move the bed curtains separate and the lower trays. Of course, the doors can open as well.

Highly detailed textures allow close up rendering. i.e. the lockers have name insigns, all separate textures, so you can pin your own name on it. Or you can use your picture to pin it to the insight locker poster.

A set of 13 light sets (all in modular way) enlighten your quarters as you wish.

18 poses for M4 and V4 also included for the special settings in this room, such as like standing on the lockers, sitting or lying in bed, or just sitting on the table and have a chat after your mission. (The poses work also well with the 2260 Scifi Bar and Canteen).

Camera sets included for four major spottings.

This is really cheap price entry product to the 2260 Series line, given you a good impression of what you receive for your money. Those sets all go along a general baseline of style and fit to each other.

If you ever whished, making your science fiction story in Poser, this is your perfect start or your environment!

Out of the box, this set contains:

Figures and Props:
– Wall Sets P1 – P4 (Modular Parts fitting to a large room)
– Lockers as figures, placing into each part of the room
– A table set with six seats, all boned so you can move them around freely, but controlled
– A morphable set of a cushion and blanket

Lights:
– A moduler set of 17 light sets for the room

Poses:
– 9 Poses for M4
– 9 Poses for V4

Rem: I recommend using my free poses for M4 and V4 for other setups, check my website for the freebies.

Cameras:
– four camera sets for a dolly cam

The entire set is build in modular way. You only need to load the parts you need.

Wall Parts use morph injects to open the doors, bed curtains and trays on the bottom.
You can also simply assemble this set with my free corridors to connect the other 2260 series sets, or simlpy make your own scenes.

Rem: Victoria 4 or Michael 4 figure, character, clothing or hair not included!
DAZ Studio has been tested. All props and figures load ok. Textures for the lockers must be manually applied.

Up, hurry, Pilot. Or do you need a special invitation….?

 

 

2260 SciFi Series, Products

Product: Reactor 2260 by 3-D-C

Leave a comment

Original Price: 13.10$

Untitled-1  http://www.renderosity.com/mod/bcs/reactor-2260-by-3-d-c/74070

“Attention! We have a serious reactor leak in Sector B!
Go, get the cooling system turned of, so i can shut down the core!”

“You gonna need this!”, i would say! Whether you have a spacecraft, a space station or whatever entity your Poser Sci Fi Universe live in,
you do need a plant to create power or warp your ships through space. Here comes your ultimate Reactor!
This is not just large… no, this is massive, this is huge! The room is devided into four sections, each section is a combination of
three separate wall parts, the floor and the ceiling. This gives you extreme flexibility to assemble and load the pieces needed, or load
them all if you need the entire thing. The core is split into two halfs, plus the inner core in two halfs. All this is done to allow extreme long
focal lense shots or even just to minimize render needs of memory etc.
All wall parts come with separate lights, all in total 16 light sets. 14 poses for M4 and V4 included as well as camera sets.
You see: If you need power, here is your solution!
The entire set fits to the 2260 space series.

Out of the box, this set contains:

Figures and Props:
– Wall sets for sections P1-P4, each of three parts, so all in total 12 Side Walls, all setup to load
to the exact point
– Floors and Ceiling for each Section
– The Outer Core in two pieces, Main and Backside to allow peak in shots
– The Inner Core in two pieces
– The Handrails to the above mentioned wall sets
– A Single nuclear container

Lights:
– Modular Light sets for the various room parts (P1-P4 and Ambient lights) Totally 16 sets
– Lights for the Inner Core

Poses:
– 7 Poses for M4 (all special to the set)
– 7 Poses for M4 (all special to the set)
Rem: I recommend using my free poses for M4 and V4 for other setups, check my website for the freebies.

Cameras:
– seven camera sets for a dolly cam

The entire set is build in modular way. You only need to load the parts you need.

Wall Parts use morph injects to open the doors. You can also simply assemble this set with my free corridors to connect
the other 2260 series sets, or simlpy make your own scenes.

Dont wait any longer until you run out of auxiliry power. This is an urgent need for your facility.