Category Archives: General SciFi

2260 SciFi Series, Products

Product: Reactor 2260 by 3-D-C

Leave a comment

Original Price: 13.10$

Untitled-1  http://www.renderosity.com/mod/bcs/reactor-2260-by-3-d-c/74070

“Attention! We have a serious reactor leak in Sector B!
Go, get the cooling system turned of, so i can shut down the core!”

“You gonna need this!”, i would say! Whether you have a spacecraft, a space station or whatever entity your Poser Sci Fi Universe live in,
you do need a plant to create power or warp your ships through space. Here comes your ultimate Reactor!
This is not just large… no, this is massive, this is huge! The room is devided into four sections, each section is a combination of
three separate wall parts, the floor and the ceiling. This gives you extreme flexibility to assemble and load the pieces needed, or load
them all if you need the entire thing. The core is split into two halfs, plus the inner core in two halfs. All this is done to allow extreme long
focal lense shots or even just to minimize render needs of memory etc.
All wall parts come with separate lights, all in total 16 light sets. 14 poses for M4 and V4 included as well as camera sets.
You see: If you need power, here is your solution!
The entire set fits to the 2260 space series.

Out of the box, this set contains:

Figures and Props:
– Wall sets for sections P1-P4, each of three parts, so all in total 12 Side Walls, all setup to load
to the exact point
– Floors and Ceiling for each Section
– The Outer Core in two pieces, Main and Backside to allow peak in shots
– The Inner Core in two pieces
– The Handrails to the above mentioned wall sets
– A Single nuclear container

Lights:
– Modular Light sets for the various room parts (P1-P4 and Ambient lights) Totally 16 sets
– Lights for the Inner Core

Poses:
– 7 Poses for M4 (all special to the set)
– 7 Poses for M4 (all special to the set)
Rem: I recommend using my free poses for M4 and V4 for other setups, check my website for the freebies.

Cameras:
– seven camera sets for a dolly cam

The entire set is build in modular way. You only need to load the parts you need.

Wall Parts use morph injects to open the doors. You can also simply assemble this set with my free corridors to connect
the other 2260 series sets, or simlpy make your own scenes.

Dont wait any longer until you run out of auxiliry power. This is an urgent need for your facility.

2260 SciFi Series, Products

Product: SciFi Hangar 2260 by 3-D-C

Leave a comment

Original Price: 11.90$

Untitled-1  http://www.renderosity.com/mod/bcs/scifi-hangar-2260-by-3-d-c/73455

“Spacestation Prime, i need to land my spacecraft! I am running out of Antimatter!”
“Spacecraft 91-X, you are clear to land on Hangar Bay AO-989”

Here is the Hangar Bay for your SciFi Scenes. The one bay you had been waiting for, for a low price.
The Bay is build in modular way, so you can easily assemble what you need, or leave that away, that you dont need. That makes long focal lense shots very easy. The Hangar is a complete set of wall sets, objects and figures, that give you so many ways of making your scenes, you may need a while to discover!
Equipped with Light sets and Cameras, basic poses and smartprops, you will not get tired assembling more complex scenes. In alliance with the other sets of the 2260-SciFi Series of 3-D-C this makes a very complete set!

The Hangar comes with the following items:

Product Content
Figures and Props:
– Back Wall Set with injected Morphs to open and close the doors
– Right Wall Set with injected Morphs to open and close the doors
– Left Wall Set with injected Morphs to open and close the doors
– Main Ceiling
– Set of the Left WalkWay
– Set of the Right Walk Way
– Set of the Rear Walk Way
– Front Wall
– Front Gate as Biomechanical Gate with morph to open and close
– Front Gate as Mechanical Gate with morph to open and close
– PinPads for the Left, Right and Backwall
– Handrails for Left, Right and Backwall
– The Backplane as Space background
– The Outside wall for outside shots
– Side Cabin for the lift guy
– Large Spots for the Ceiling and Front
– The Lift Figure: Boned Figure to let you raise and lower the lift platform
– The Crane: A boned figure to let you open the cranefingers, lower and raise the crane and adjust the ropes
– Various Add ons: Container props, Crates, Cubes, Oiltanks, etc.

Poses:
– Five basic poses for M4 (Crane usage, Lift usage, Ship coordination, Walk Stairs up and down)

Lights:
12 different light sets:
– 11 single sets to load in serial way
– 1 set to load all 11 together

Smartprops:
– The jug prop for left and right hand plus the handposes for it

Cameras:
– 11 different camera sets for direct shots in the Hangar

Materials:
– 4 different materials for the background plane

Still not convinced, privateer?

Take a look at the sample renders. All renders are pure 100% Poserwork, no postwork done.

I constantly create new add ons and freebies for my products. Check the 2260 product line for more info. This product will gain value over time!

Remark: Spaceships, V4/M4 model, clothing and hair not included

Ships used in this samples:

XHR3 Ship by Simon 3D , avaliable here on Renderosity
Tengu Fighter by Simon 3D , avaliable here on Renderosity
Vanguard Ship, avaliable on DAZ3D

2260 SciFi Series, Products

Product: SciFi Bar and Canteen 2260 by 3-D-C

Leave a comment

Original Price: 11.50$

Untitled-1  http://www.renderosity.com/mod/bcs/scifi-bar-and-canteen-2260-by-3-d-c/73119

“Live is hard enough!”, William said.
“Lets get some drinks and Fun in the Neptuns Bar on Aplha Prime!”

Your search is over, Privateer! Finally we opened our first Bar to give all of you unrestful travellers in space a place to rest and
have a pint.
The Neptuns Bar is a huge place, build in modular way, so you can assemble the parts you need, place the items where you
which and create a complete individual space for your space-cowboys. Dont waste time in looking for single items to be
assembled. This is the one you need, bountyhunter!

Out of the box, this set contains:

Figures and Props:
– seven room parts in modular build (Check the below product pictures for a schematic view)
– boned tabled figure, single and in set. The chairs are boned items, so you have one figure with bones to move the chairs
Very easy to handle
– Set of relaxing couches, as set and as single
– A Bar
– A stool Figure for the bar, the stools are boned items so you can move them along
– a stage prop plus a separate pole for some sexy strip dance
– Ball light props
– Round standing tables as set and as single
– Posters for the Walls
– Bottles for the bar
– Smart Props (A drinking glas and a beer bottle)
– Room parts with Doors can open the doors through a morph inject
– The windowd room parts can open and close the blindings
– Two Individual Bar Signs “Neptuns Bar” and “Venus Inn”

Lights:
– Modular Light sets for the various room parts (P1-P7)
– Ball Lights
– Stage Lights
– Bar Lights
– Sign Lights
– Sun Lights

Poses:
– 23 Poses for M4 and V4
– 6 Special Pole Dancer Poses

Cameras:
– different Cameras spotting to various areas of the Bar

The entire set can be reassembled and used as a SciFi Canteen as well. So you can assemble stools, chairs and use one of the over
30 boxed poses to make this look like a star carrier canteen.

This package is so packed with stuff, you probably need a while to find it all out. Really a lot of value for your space credits, privateer!

The set corresponds to our other SciFi 2260 Series Products such as the Medical Sick Bay and the 2260 Apartment.
The modularity of the set makes it easy to work even with long focal lenses and keeps rendering memory low as you
only need to load and apply the set parts you need.
The set has been defined to work with even lower render settings and should still then deliver good quality.
Its designed to work in Poser 6 upward. It may work in D/S 3, however, its not supported through 3-D-C. We did D/S Testing,
and found all objects etc run fine. However, one shader has been Poser exclusive but you may not recognize.

2260 SciFi Series, Products

Product: Medical Laboratory & Sick Bay

Leave a comment

Original Price: 13.10$

Untitled-1  http://www.renderosity.com/mod/bcs/medical-laboratory-sick-bay/72795

Welcome to our Laboratory on Mars. This is our SciFi Lab and Sick Bay of the 2260 Series.
This modular environment set is build for maximum comfort use. All wall and room sections
are divided into six parts, so you can assemble whatever section of the laboratory you need.

Multiple props will give you an immidiate, effective start to your medical career. And even if you
loose a patient in a critical surgery, resurrect them in your resurrection pipes.

The set comes with the six modular room portions and include the following parts:

– 6 Parts for the Room (P1 to P6, see next pictures), with moveable doors
– 6 Parts of the Air Ventilation System
– 4 Screens to be adopted to the Room Parts
– 4 Sets of lockers to be adopted to the Room Parts, boned, you can open each single door
– Investigation Table, with two Arms, each with four moveable parts, boned figure
– Resurrection Pipes, boned to open left and right glass door, and raise and lower the fill
– Light Props for the inner section
– Single Bed with Injected Morph to raise and lower the head section
– Desk with injected morphs to eject each single tray
– Desk Stuff (PC and Papers)
– Chair with Morph to raise and lower and lay back
– Medical Machine for the wall Part P2

To enlight your environment you receive nine light sets, which can all be loaded in
incremental order:

– Neon Lights for the inner set
– an surrounding light set
– one light set per room part (P1-P6)

To easy your first renders, we included five camera sets

You also receive:
– 10 poses for M4 and V4

The set has been designed for Poser, but will work in D/S as well. Standard Tests have been performed.

So, dont let your urgent surgery wait! Get your characters in and get them medical treatment! Now!

Renders shown here are partly external renders. All Objects had been designed for Poser or DAZ.

 

 

2260 SciFi Series, Products

Product: Apartment 2260 by 3-D-C

Leave a comment

Original Price: 10.90$

Untitled-1  http://www.renderosity.com/mod/bcs/apartment-2260-by-3-d-c/72506How will live be in 2260?

This modular, futuristic apartment set will give you an idea how it might be like.
Inspired from movies and upon the idea that we will have to let more people live in even limited space,
i designed this room set to have the most important life-needed items combined in four walls.
All parts are moveable or animate-able through a boned structure, no morphs that screw up the
items during movement. The room set is a combination of six figures:

The Window Wall contains a set of blinds which can be closed
The Door Wall set, the door that slides up and down
The Right Wall set with an integrated shower. The Door can be lifted. In the Shower
you will find an ejectable toilet, which seat cover can be lifted.
The wall also includes an integrated cabinet, the closing can be upped and lifted.
Also there is a computer terminal table integrated which can be slided into the wall for more space.
The Left Wall set includes a sliding bed, two cabinets with closings and a gutter
The floor includes a seat which can be lifted up and down
The ceiling includes three main halo lights.

So, sleep, or live your life! Cushion and Blanket included with injected morphs.

The entire set of walls are separated figures. You can load the walls you need, or leave the
ones off, you dont need. Or simply hide them via the object settings.
Also included in this set are:

Five Light sets (three day lights, two night lights)
12 poses for V4, conforming to the places in the room: Shower, Seat, bed, etc….
7 Camera Sets for Poser
a dirty cushion with morphs to pose
a dirty blanket with morphs to pose
Four background pics for the backplane (two day, two night settings)

Optimized for a life on minimal space

This apartment is my view on the future. Well, i guess we all have to accept that future will be different!

Not included in this set is V4 figure, clothing and hair.

Check out my other SciFi Objects in my Store….
Future is here! Give it your touch!

A handbook is included.

Rem.: Renders in the samples are partly poser compilations, rendered in an external render engine; partly
entire poser renders. Please check the remarks on the samples.
Please read instructions manual first.

Product not designed for DAZ.

Products, SciFi Ships

Product: FHM-110 Bounty Hunter Spacecraft

Leave a comment

Original Price: 15.00$

Untitled-1  http://www.renderosity.com/mod/bcs/fhm-110-bounty-hunter-spacecraft/72302The FHM-110 is a spacecraft, designed for single transport and local orbit exploration.
It’s not equipped with an hyperdrive, however, can still leave orbit and explore the nearer space.

The spin able wings allow the FHM-110 to change up drift even in low volume athmoshere and,
is therewith extremely well designed for low distance battle.
The two front ‘equinam’-turrets are well designed for “seek and destroy” missions.
The Vehicle is entirely boned to allow animation.

Bones and Body parts

The following parts are move/animate-able:

Left and Right wing can swing up and down

The closing can open and close

The landing flaps can be opened and closed (we recommend to use the poses which come with the product)

The Engine Thruster has an implemented morph

The belt can be adjusted to fit the seating poses

Props

Two props are basically delivered with this product:

The Core Engine, in case you remove the one grouped to the figure.
There is a morph injected in the engine to open and close the thruster.

The Seat belt, also comes with a morph to adjust to the sit pose of your figures in the seat.

Poses

The FHM-110 comes with a M4 and V4 Pose to let your chars sit down in the spacecraft!

Landing Gear and Flaps are animateable and complex designed. Both can be moved via additional poses supplied.

Thanks for your interest in my products.

Let the hunt begin!

Information: V4/M4 Figures, Clothing, Hair are not part of this package.
Product has been tested in Poser 7 and Pro.
The product has also been tested in DAZ DS2.3, however, the initial load of the Figure may take a minute.

 

Products, SciFi Ships

Product: FHM-330 – SciFi Vehicle

Leave a comment

Original Price: 15.00$

Untitled-1  http://www.renderosity.com/mod/bcs/fhm-330—scifi-vehicle/71984

“UP and AWAY!”, she said, and got her hell machine up into space! Here comes the sci fi vehicle, your V4 and M4 have been waiting for. A Retro Style, recolourable machine, build for maximum flexible usage. Military and Civilian. The Figure is boned to anime the below parts: – Swing the Left and Right Door UP – Open the landing flaps in the front and rear – Pitch the pack part (to give your thruster a better upthrust) – Rotate the steering wheels – OPen the front gutter to eject the guns The Gun and Landing Gear are additional Props and parented. The entire body is UV Mapped. The Spacecraft comes with four styles – Red clean – Blue clean – Military Style – Grey Wolven all can be applied through the Pose Libary. A ZIP File of all UV Maps is included. New Mats coming soon as freebies to this product. The vehicle is high detailed poly. I do recommend to run your rendering program stand alone due to memory uagse. To complete this futuristic package, you also get Poses for V4 and M4 to – Lean on Front – Sit in the FHM – Look over Shoulder – Open the Door (7 in total but more coming soon) There is one light set coming with it, which i used for the promo renders. Usage GUideline included. Product is DAZ Tested. Shall work without problems in DAZ. Nevertheless, the first load of the vehicle may take a while due to the high poly count. I have tested it as well on a low spec 2 GIG Laptop, no issues seen. More features to this product coming soon. Thanks for your interest in my products. Extract of my book “Meridian” … “The FHM Series where build in 2210 in new Detroit by the 3DC Motor company. First assembled as the base vehicles for the Union Space Marine corps, it quickly adopted to become a retro civilian hovercraft. 3DC MOtor started engineering an entire series of the FHM series for civilian use and started an unbelieveable career with it.” – The Sunday Telegraph 2212 Credits for the promo renders go to: Olympis Mons Hangar from Redhouse Studios (DAZ3D) Landing Platform by coflek-gnorg Espilon Suite for Michael by Lourdes Mercado (DAZ3D) Kikas Angel by Aery_Soul Sci Fi Streets Construction set by coflek-gnorg Novariens Holy for V4 by Orion1167 (DAZ3D)